Wool felt/thermal insulation felt

Wool felt/thermal insulation felt 1.Density: 0.16-0.70g/cm3 2.Thickness: 0.5-75mm 3.Color: White and cream 4.Wool finene

Wool felt/thermal insulation felt1.Density: 0.16-0.70g/cm3 2.Thickness: 0.5-75mm 3.Color: White and cream 4.Wool fineness : 58-9

100%wool hard felt

Our product range includes Felt Strips, Felt Rolls, Polishing Felts, Felt Bobs and Wheels, Decorative Felts, Handicraft Felts, Medical Felts, Printing Felts, Miscellaneous Felt Products and Bedding Industry Felts

Where application demands high qualities of compression, elasticity, resistance to ageing and wear, high absorption and low abrasion, woollen or blended wool felts are ususally specified.

    Within each density range, stock many qualities, each has specific features and numerous finishes are available. We will be pleased to advise you on request.

SYNTHETIC FELTS: This describes all felts made using man-made fibres as a base. Polyester, acrylic and other man-made fibres will not naturally fuse together like wool. Hence it becomes necessary to mix and bind them together using barbed needles. Such felts are referred to as 'Needleloom'. Other synthetic felts are fused by chemical impregnations and heat, and these tend to be harder and more rigid than needle loomed felts.

Synthetic felt is measured by weight in grammes per square metre. It can be as light as 20gm2 or as heavy as several hundred grammes per m2. However, unlike woollen felts where density, hardness and thickness are all interrelated to tensile strength, synthetic felts owe their hardness and strength to fibre type, impregnations and finish. Hence, where a very strong, thin felt is required, synthetics offer advantages over wool. The same is true of high/low temperature performance and where pore size is critical to the micron, as in precision filtration.

Synthetic felts cannot match wool's performance in compressibility, elasticity, absorption and abrasion, but they can be harder wearing, and in applications where either can perform, can offer price advantage. Chemical compatibility to application must of course be considered. Wool and synthetic blends offer combinations of both fibre qualities, as in textiles.

Woollen Felts: Rating	Density: g/cm³	Typical Application
Soft	0.18	Light air, dust and oil seals
Medium	0.22	Gaskets, seals, washers, wicks, absorbent and resilient pads, cladding
Medium firm	0.26
Firm	0.35	Clutch linings, wiping felts, small cut parts
Extra Firm	0.40
Hard	0.45	Polishing, wiping, sander-backing, cut and formed parts
Hard	0.48
Extra Hard	0.60	Polishing, cut and formed parts,vacuum forming dies

0...

Wool felt/thermal insulation felt